Home Map

ค้นหาสินค้าโดยป้อนรายละเอียดของ
สินค้าที่ต้องการ เช่น รุ่น รายละเอียด
ของสินค้า









 Home > ลำโพง (Speaker) > Box Speakers
  Box Speakers  
BS-1030B Universal Speaker
The BS-1030B is a small, 2-way bass-reflex type speaker featuring a wide frequency range suitable for use for announcements and music playback. The BS-1030B can be used for both high-impedance and low-impedance applications. The speaker's splash-proof construction permits it to be installed under the eaves where the speaker is not directly exposed to rain.
Enclosure 2-way bass-reflex type
Rated Input 30 W
Rated Impedance 8 Ω
100 V line: 330 Ω (30 W), 500 Ω (20 W), 670 Ω (15 W), 1 kΩ (10 W), 2 kΩ (5 W)
70 V line: 170 Ω (30 W), 250 Ω (20 W), 330 Ω (15 W), 500 Ω (10 W), 1 kΩ (5 W)
Sound Pressure Level 90 dB (1 W, 1 m)
Frequency Response 80 Hz - 20 kHz
Speaker Component 12 cm cone-type + dome-type
Speaker Cord 2-core cabtyre cord with diameter of 6 mm
Operating Temperature -10 ℃ to +50 ℃
Water Protection IPX4 (can be installed vertically or horizontally.*)
Finish Enclosure: ABS resin, black (RAL9011 GRAPHITE BLACK), paint
Net: Surface treated steel plate, black (RAL9011 GRAPHITE BLACK), powder coating
Bracket: Surface treated steel plate, black equivalent to RAL9011 GRAPHITE BLACK,
powder coating
Dimension 196 (W) × 290 (H) × 150 (D) mm (unit only)
Weight 2.5 kg (unit only)
Accessory Bracket……1, Bracket mounting screw……2, Bracket mounting washer……2
Option Applicable bracket: WCB-12, TMB-1, SP-410
Applicable st
 
ประกัน : 1 ปี
ราคา : Call บาท
 
BS-1030W Universal Speaker
The BS-1030W is a small, 2-way bass-reflex type speaker featuring a wide frequency range suitable for use for announcements and music playback. The BS-1030W can be used for both high-impedance and low-impedance applications. The speaker's splash-proof construction permits it to be installed under the eaves where the speaker is not directly exposed to rain.
The BS-1030W is a small, 2-way bass-reflex type speaker featuring a wide frequency range suitable for use for announcements and music playback. The BS-1030W can be used for both high-impedance and low-impedance applications. The speaker's splash-proof construction permits it to be installed under the eaves where the speaker is not directly exposed to rain.


 
ประกัน : 1 ปี
ราคา : Call บาท
 
BS-634 Wall Mount Speaker Click here for more info
The BS-634 can be installed easily on the wall with help of the plug-in speaker receptacle.
The BS-634 can be installed easily on the wall with help of the plug-in speaker receptacle.Rated Input 6 W
Rated Impedance 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W)
Sensitivity 90 dB (1 W, 1 m)
Frequency Response 120 - 18,000 Hz
Speaker Component 12 cm (5") cone-type
Input Connector M4 screw terminal, distance between barriers: 11 mm (0.43")
Finish Enclosure: HIPS resin (fire resistant grade UL94 V-0 or its equivalent),
off-white (RAL 9010 or equivalent color)
Net: Surface-treated steel plate, off-white (RAL 9010 or equivalent color), paint
Dimensions 210 (W) × 330 (H) × 80 (D) mm (8.27" × 12.99" × 3.15")
Weight 1.3 kg (2.87 lb)
Accessory Speaker receptacle …1, Wall mounting screw …2
 
ประกัน : 1 ปี
ราคา : Call บาท
 
BS-1034S Wall Mount Speaker
The BS-1034S can be installed easily on the wall with help of the plug-in speaker receptacle.
The BS-1034S can be installed easily on the wall with help of the plug-in speaker receptacle.Rated Input 10 W
Rated Impedance 100 V line: 1 kΩ (10 W), 2 kΩ (5 W), 3.3 kΩ (3 W), 10 kΩ (1 W)
70 V line: 500 Ω (10 W), 1 kΩ (5 W), 2 kΩ (2.5 W), 3.3 kΩ (1.5 W), 10 kΩ (0.5 W)
Sensitivity 90 dB (1 W, 1 m)
Frequency Response 120 - 20,000 Hz
Speaker Component Low frequency: 12 cm (5") cone-type, High frequency: Balanced dome-type
Input Connector M4 screw terminal, distance between barriers: 11 mm (0.43")
Finish Enclosure: HIPS resin (fire resistant grade UL94 V-0 or its equivalent), silver
Net: Steel plate, silver, paint
Dimensions 210 (W) × 330 (H) × 80 (D) mm (8.27" × 12.99" × 3.15")
Weight 1.4 kg (3.09 lb)
Accessory Speaker receptacle …1, Wall mounting screw …2
 
ประกัน : 1 ปี
ราคา : Call บาท
 
BS-633A Wall Mount Speaker
The BS-633A is wall mount speaker made of ABS resin and can be hooked or mounted directly on the wall. The push-in type input terminal makes cable connections easy and allows bridge wiring. The input impedance can be easily changed by changing the tap position of the transformer from the rear side of the speaker.
Rated Input 6 W (100 V line), 3 W (70 V line)
Rated Impedance 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 10 kΩ (1 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 10 kΩ (0.5 W)
Sensitivity 91 dB (1 W, 1 m)
Frequency Response 120 - 15,000 Hz (-20 dB)
Speaker Component 12 cm (5) cone-type"
Applicable Cable 600 V vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire: φ0.8 - φ1.6 mm (equivalent to AWG 20 - 14)
7-core twisted copper wire: 0.75 - 1.25 m㎡ (equivalent to AWG 18 - 16)
Connection Push-in connector (bridging terminal)
Operating Temperature -10℃ to +50℃ (14゜F to 122゜F)
Finish Case: ABS resin, off-white
Rear board: Hard board
Dimensions 173 (W) × 195 (H) × 101 (D) mm (6.81 × 7.68" × 3.98")"
Wall Mounting Dimensions Case front mount: 184 mm (7.24)"
Fixing hole mount: 120 mm (4.72)"
Weight 780 g (1.72 lb)
Accessory Speaker mounting screw (4 × 35 (0.16 × 1.38")) … 2
 
ประกัน : 1 ปี
ราคา : Call บาท
 
BS-633AT Wall Mount Speaker
The BS-633AT is wall mount speaker made of ABS resin and can be hooked or mounted directly on the wall. The push-in type input terminal makes cable connections easy and allows bridge wiring. The input impedance can be easily changed by changing the tap position of the transformer from the rear side of the speaker. The BS-633AT has a built-in attenuator and can be connected to a 2-wire and 3-wire systems.
a 2-wire and 3-wire systems.Rated Input 6 W (100 V line), 3 W (70 V line)
Rated Impedance 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W)
Sensitivity 91 dB (1 W, 1 m)
Frequency Response 120 - 15,000 Hz (-20 dB)
Speaker Component 12 cm (5") cone-type
Applicable Cable 600 V vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire: φ0.8 - φ1.6 mm (equivalent to AWG 20 - 14)
7-core twisted copper wire: 0.75 - 1.25 m㎡ (equivalent to AWG 18 - 16)
Connection Push-in connector (bridging terminal)
Attenuation Level 3 W: OFF, 1 (-12 dB), 2 (-6 dB), 3 (0 dB)
6 W: OFF, 1 (-13 dB), 2 (-7 dB), 3 (0 dB)
Operating Temperature -10℃ to +50℃ (14゜F to 122゜F)
Finish Case: ABS resin, off-white
Rear board: Hard board
Dimensions 173 (W) × 195 (H) × 101 (D) mm (6.81" × 7.68" × 3.98")
(excluding volume control)
Wall Mounting Dimensions Case front mount: 184 mm (7.24")
Fixing hole mount: 120 mm (4.72")
Weight 810 g (1.79 lb)
Accessory Speaker m
 
ประกัน : 1 ปี
ราคา : Call บาท
 
BS-678 Wall Mount Speaker
The BS-678, of which cabinet is made of wood, can be installed in a vertical or horizontal orientation. Either concealed in-wall wiring or exposed wiring can be used for speaker cable connection. The speaker structure that permits direct wall-mounting with screws prevents the speaker from falling easily even if an outward force is applied to. The input impedance can be easily changed by changing the tap position of the transformer. Two built-in 6-inch double cone speaker units deliver high quality sound. The push-in type input connector makes cable connections easy and allows bridge wiring.
Rated Input 6 W (100 V line), 3 W (70 V line)
Rated Impedance 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 6.7 kΩ (1.5 W), 13 kΩ (0.8 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 6.7 kΩ (0.8 W), 13 kΩ (0.4 W)
Sensitivity 94 dB (1 W, 1 m) (500 Hz - 5 kHz, pink noise)
Frequency Response 150 Hz - 20 kHz (peak -20 dB)
Speaker Component 16 cm (6") double cone-type
Applicable Cable 600 V vinyl-insulated cable (IV wire or HIV wire)
Solid wire: φ0.8 - φ1.6 mm (equivalent to AWG 20 - 14)
7-core twisted wire: 0.75 - 1.25 m㎡ (equivalent to AWG 18 - 16)
Connection Push-in connector (bridging terminal)
Finish Baffle: HIPS, off-white (RAL 9010 or equivalent color)
Cabinet: Particle board with pvc sheet, off-white (RAL 9010 or equivalent color)
Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color)
Dimensions 250 (W) × 190 (H) × 110 (D) mm (9.84" × 7.48" × 4.33")
Weight 1.7 kg (3.75 lb)
Accessory Speaker mounting screw (4 × 35 (0.16" × 1.38")) …2
 
ประกัน : 1 ปี
ราคา : Call บาท
 
BS-678B Wall Mount Speaker
The BS-678B, of which cabinet is made of wood, can be installed in a vertical or horizontal orientation. Either concealed in-wall wiring or exposed wiring can be used for speaker cable connection. The speaker structure that permits direct wall-mounting with screws prevents the speaker from falling easily even if an outward force is applied to. The input impedance can be easily changed by changing the tap position of the transformer. Two built-in 6-inch double cone speaker units deliver high quality sound. The push-in type input connector makes cable connections easy and allows bridge wiring.
Rated Input 6 W (100 V line), 3 W (70 V line)
Rated Impedance 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 6.7 kΩ (1.5 W), 13 kΩ (0.8 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 6.7 kΩ (0.8 W), 13 kΩ (0.4 W)
Sensitivity 94 dB (1 W, 1 m) (500 Hz - 5 kHz, pink noise)
Frequency Response 150 Hz - 20 kHz (peak -20 dB)
Speaker Component 16 cm (6") double cone-type
Applicable Cable 600 V vinyl-insulated cable (IV wire or HIV wire)
Solid wire: φ0.8 - φ1.6 mm (equivalent to AWG 20 - 14)
7-core twisted wire: 0.75 - 1.25 m㎡ (equivalent to AWG 18 - 16)
Connection Push-in connector (bridging terminal)
Finish Baffle: HIPS, black (RAL 9011 or equivalent color)
Cabinet: Particle board with pvc sheet, black (RAL 9011 or equivalent color)
Grille: Surface-treated steel plate net, black (RAL 9011 or equivalent color)
Dimensions 250 (W) × 190 (H) × 110 (D) mm (9.84" × 7.48" × 4.33")
Weight 1.7 kg (3.75 lb)
Accessory Speaker mounting screw (4 × 35 (0.16" × 1.38")) …2
 
ประกัน : 1 ปี
ราคา : Call บาท
 
BS-678T Wall Mount Speaker
The BS-678T, of which cabinet is made of wood, can be installed in a vertical or horizontal orientation. Either concealed in-wall wiring or exposed wiring can be used for speaker cable connection. The speaker structure that permits direct wall-mounting with screws prevents the speaker from falling easily even if an outward force is applied to. The input impedance can be easily changed by changing the tap position of the transformer. Two built-in 6-inch double cone speaker units deliver high quality sound. The push-in type input connector makes cable connections easy and allows bridge wiring. BS-678T have a built-in attenuator and can be connected to a 2-wire or 3-wire system
Rated Input 6 W (100 V line), 3 W (70 V line)
Rated Impedance 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 6.7 kΩ (1.5 W), 13 kΩ (0.8 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 6.7 kΩ (0.8 W), 13 kΩ (0.4 W)
Sensitivity 94 dB (1 W, 1 m) (500 Hz - 5 kHz, pink noise)
Frequency Response 150 Hz - 20 kHz (peak -20 dB)
Speaker Component 16 cm (6") double cone-type
Applicable Cable 600 V vinyl-insulated cable (IV wire or HIV wire)
Solid wire: φ0.8 - φ1.6 mm (equivalent to AWG 20 - 14)
7-core twisted wire: 0.75 - 1.25 m㎡ (equivalent to AWG 18 - 16)
Connection Push-in connector (bridging terminal)
Attenuation OFF, 1 (-12 dB), 2 (-6 dB), 3 (0 dB)
Finish Baffle: HIPS, off-white (RAL 9010 or equivalent color)
Cabinet: Particle board with pvc sheet, off-white (RAL 9010 or equivalent color)
Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color)
Dimensions 250 (W) × 190 (H) × 110 (D) mm (9.84" × 7.48" × 4.33")
(excluding volume control knob)
Weight 1.7
 
ประกัน : 1 ปี
ราคา : Call บาท
 
 

 
 

หสม.เทคนิคคอมพิวเตอร์แอนด์อิเล็กทรอนิกส์ (เยื้องธนาคารอิสลาม สงขลา) Tel./Fax. 074-435225