Home Map

ค้นหาสินค้าโดยป้อนรายละเอียดของ
สินค้าที่ต้องการ เช่น รุ่น รายละเอียด
ของสินค้า









 Home > ลำโพง (Speaker) > Interior Design Speakers
  Interior Design Speakers  
PE-64 Pendent Speaker
The PE-64 is a pendant speaker designed for ceiling suspension installations. Considered in architectural design, it can blend in with lighting equipment. A directly-attached 5 m (16.4 ft) cable allows the speaker to be suspended from the high ceiling. The PE-64 is driven on high-impedance (100 V and 70 V) line. The input power (impedance) can be easily changed at the upper side of the speaker. The speaker is easy to repaint so as to meet a wide range of design needs
Enclosure Bass-reflex type
Rated Input 6 W (100 V line), 3 W (70 V line)
Rated Impedance 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 10 kΩ (1 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 10 kΩ (0.5 W)
Sensitivity 90 dB (1 W, 1 m) (500 - 5,000 Hz, pink noise)
Frequency Response 100 - 18,000 Hz (peak -20 dB)
Speaker Component 12 cm (5") cone-type
Speaker Cord 2-core cabtyre cord 5 m (16.4 ft)
Applicable Cable 600 V vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire: φ0.8 - φ1.6 mm (equivalent to AWG 20 - 14)
7-core twisted copper wire: 0.75 - 1.25 m㎡ (equivalent to AWG 18 - 16)
Connection Push-in connector (bridging terminal-2 branch type)
Finish Enclosure: HIPS resin, off-white (RAL 9010 or equivalent color)
Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color), paint
Dimensions φ186 × 251 (H) mm (φ7.32" × 9.88") (unit only)
Weight 1.5 kg (3.31 lb) (unit only)
Accessory Ceiling bracket …1, Mounting hanger …1, Ceiling cover …1
 
ประกัน : 1 ปี
ราคา : Call บาท
 
PE-64 Pendent Speaker
The PE-304 is a pendant speaker designed for ceiling suspension installations. Considered in architectural design, it can blend in with lighting equipment. A directly-attached 5 m (16.4 ft) cable allows the speaker to be suspended from the high ceiling. The PE-304 is driven on both high-impedance (100 V and 70 V) and low-impedance (8 Ω) lines. The input power (impedance) can be easily changed at the upper side of the speaker. The speaker is easy to repaint so as to meet a wide range of design needs.
Enclosure Bass-reflex type
Rated Input 30 W (100 V, 70 V line, 8 Ω)
Rated Impedance 100 V line: 330 Ω (30 W), 500 Ω (20 W), 670 Ω (15 W), 1 kΩ (10 W), 2 kΩ (5 W)
70 V line: 170 Ω (30 W), 250 Ω (20 W), 330 Ω (15 W), 500 Ω (10 W), 1 kΩ (5 W)
8 Ω
Sensitivity 91 dB (1 W, 1 m) (500 - 5,000 Hz, pink noise)
Frequency Response 70 - 20,000 Hz (peak -20 dB)
Speaker Component 12 cm (5") cone-type + balanced dome-tweeter
Speaker Cord 2-core cabtyre cord 5 m (16.4 ft)
Applicable Cable 600 V vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire: φ0.8 - φ1.6 mm (equivalent to AWG 20 - 14)
7-core twisted copper wire: 0.75 - 1.25 m㎡ (equivalent to AWG 18 - 16)
Connection Push-in connector (bridging terminal-2 branch type)
Finish Enclosure: HIPS resin, off-white (RAL 9010 or equivalent color)
Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color), paint
Dimensions φ186 × 251 (H) mm (φ7.32" × 9.88") (unit only)
Weight 2.1 kg (4.63 lb) (unit on
 
ประกัน : 1 ปี
ราคา : Call บาท
 
PJ-64 Projection Speaker
The PJ-64 is a projection speaker designed for ceiling and wall installations. Considered in architectural design, it can blend in with lighting equipment. The supplied swivel bracket allows for flexible speaker angle adjustment. The PJ-64 is driven on high-impedance (100 V and 70 V) line. The input power (impedance) can be easily changed at the upper side of the speaker. The speaker is easy to repaint so as to meet a wide range of design needs.
Enclosure Bass-reflex type
Rated Input 6 W (100 V line), 3 W (70 V line)
Rated Impedance 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 10 kΩ (1 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 10 kΩ (0.5 W)
Sensitivity 90 dB (1 W, 1 m) (500 - 5,000 Hz, pink noise)
Frequency Response 100 - 18,000 Hz (peak -20 dB)
Speaker Component 12 cm (5") cone-type
Speaker Cord 2-core cabtyre cord 60 cm (1.97 ft) with diameter of 6 mm (0.24")
Finish Enclosure: HIPS resin, off-white (RAL 9010 or equivalent color)
Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color), paint
Dimensions φ186 × 369 (H) mm (φ7.32" × 14.33")
Weight 1.5 kg (3.31 lb) (unit only)
Accessory Swivel bracket …1, Speaker mounting screw (4 × 16) …3
 
ประกัน : 1 ปี
ราคา : Call บาท
 
PJ-304 Projection Speaker
The PJ-304 is a projection speaker designed for ceiling and wall installations. Considered in architectural design, it can blend in with lighting equipment. The supplied swivel bracket allows for flexible speaker angle adjustment. The PJ-304 is driven on both high-impedance (100 V and 70 V) and low-impedance (8 Ω) lines. The input power (impedance) can be easily changed at the upper side of the speaker. The speaker is easy to repaint so as to meet a wide range of design needs
Enclosure Bass-reflex type
Rated Input 30 W (100 V, 70 V line, 8 Ω)
Rated Impedance 100 V line: 330 Ω (30 W), 500 Ω (20 W), 670 Ω (15 W), 1 kΩ (10 W), 2 kΩ (5 W)
70 V line: 170 Ω (30 W), 250 Ω (20 W), 330 Ω (15 W), 500 Ω (10 W), 1 kΩ (5 W)
8 Ω
Sensitivity 91 dB (1 W, 1 m) (500 - 5,000 Hz, pink noise)
Frequency Response 70 - 20,000 Hz (peak -20 dB)
Speaker Component 12 cm (5") cone-type + balanced dome-tweeter
Speaker Cord 2-core cabtyre cord 60 cm (1.97 ft) with diameter of 6 mm (0.24")
Finish Enclosure: HIPS resin, off-white (RAL 9010 or equivalent color)
Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color), paint
Dimensions φ186 × 369 (H) mm (φ7.32" × 14.33")
Weight 2.1 kg (4.63 lb) (unit only)
Accessory Swivel bracket …1, Speaker mounting screw (4 × 16) …3
 
ประกัน : 1 ปี
ราคา : Call บาท
 
PJ-100W Projection Speaker
The PJ-100W Projection Speaker is designed for indoor use. The built-in terminal board provides an easy cable connection and allows bridge wiring. Its wide frequency range makes it suitable for use in both paging and BGM applications.
Rated Input 10 W (50 V, 70 V, 100 V Line)
Input Impedance 100 V Line : 1 kΩ (10 W), 2 kΩ (5 W), 4 kΩ (2.5 W)
70 V Line : 500 Ω (10 W), 1 kΩ (5 W), 2 kΩ (2.5W), 4 kΩ (1.25 W)
50 V Line : 250 Ω (10 W), 500 Ω (5 W), 1 kΩ (2.5 W), 2 kΩ (1.25 W),
4 kΩ (0.63 W)
Preset Impedance 1 kΩ
Sound Pressure Level 92 dB (1 m, 1 W) at 1 kHz
Speaker Component 12 cm
Frequency Response 65 Hz - 15 kHz
Finish Cabinet, Cover: ABS Resin, off-white
Bracket: SPCC, off-white
Dimensions 160 (W) × 200 (H) × 195 (D) mm (6.3" × 7.87" × 7.68")
Weight 1.8 kg (3.97 lb)
Note: Avoid installing the speaker in locations which vibrate considerably or under environments easy to be oil-contaminated.
 
ประกัน : 1 ปี
ราคา : Call บาท
 
PJ-200W Projection Speaker
The PJ-200W Projection Speaker is designed for indoor use. The built-in terminal board provides an easy cable connection and allows bridge wiring. Its wide frequency range makes it suitable for use in both paging and BGM applications.
Rated Input 20 W (50 V, 70 V, 100 V Line)
Input Impedance 100 V Line : 500 Ω (20 W), 1 kΩ (10 W), 2 kΩ (5 W)
70 V Line : 250 Ω (20 W), 500 Ω (10 W), 1 kΩ (5 W), 2 kΩ (2.5W)
50 V Line : 125 Ω (20 W), 250 Ω (10 W), 500 Ω (5 W), 1 kΩ (2.5 W),
2 kΩ (1.25 W)
Preset Impedance 500 Ω
Sound Pressure Level 95 dB (1 m, 1 W) at 1 kHz
Speaker Component 16 cm
Frequency Respons 50 Hz - 20 kHz
Finish Cabinet, Cover: ABS Resin, off-white
Bracket: SPCC, off-white
Dimensions 200 (W) × 255 (H) × 250 (D) mm (7.87" × 10.04" × 9.84")
Weight 2.5 kg (5.51 lb)
Note: Avoid installing the speaker in locations which vibrate considerably or under environments easy to be oil-contaminated.
 
ประกัน : 1 ปี
ราคา : Call บาท
 
 

 
 

หสม.เทคนิคคอมพิวเตอร์แอนด์อิเล็กทรอนิกส์ (เยื้องธนาคารอิสลาม สงขลา) Tel./Fax. 074-435225